Z-drive, G-Power 150, right-hand propeller

For propellers turning to the right in the direction of travel
Ideal for twin drives

2 couplings included for motors with 3.2 mm and 4.0 mm shafts.

Suitable for small and medium-sized motorboats.
Not suitable for racing boats.

All shafts with double stainless steel ball bearings.
Adjustable tilt angle

The drive folds up when driving over obstacles

Material: Plastic, glass fibre reinforced
Motor shaft 3.2 mm, 4.0 mm
Bore for motor bearing collar Ø 13 mm
2 couplings 3.2mm x square 2.5mm
4.0mm x square 2.5mm
Gear ratio 1:1.09, 1.09x1 = 1:1
Weight 107g
Brush electric motors of the 500, 600 series
Brushless motors G-Power 750KV(14.4V), G-Power 1450KV (7.4V)
Bolt circle of the mounting screws 19mm, 25mm, 29mm
Max. speed 9500rpm
Propeller 31mm, 33mm

Propeller direction of rotation in direction of travel right (Graupner left)!

Use of 36mm propellers or propellers with a pitch greater than 1.4 can lead to overloading of the flex shaft.

The special gear ratio ensures a long service life of the gears
Please ensure regular lubrication with our special grease for plastic-metal pairings 4.5190.5 or 4.5190.10
Do NOT use MARINEFETT for lubrication!  It is not suitable for gear drives and leads to premature wear of the gears.

5mm shaft bore in the coupling is not possible.

5mm shaft bore in the coupling is not possible.

Supplied without motor, without propeller

 Instructions German, English

Installation

The cavitation plate above the propeller should correspond to the lower edge of the hull.

The waterline should be below or equal to the motor shaft.