Voith Schneider Propeller VSP 65.BM with Brushlessmotor

Voith Schneider Propeller VSP 65.BM, the original with Brushlessmotor

Made in Germany in the original injection molds.
To be distinguished from the logo or engraving of BAUER on the kinematic base and white mounting ring.
The original Voith Schneider Propeller (model propellers) can only be ordered from us or from former manufacturer (Ludwig Bergdorf).
The rights to the design of this Voith Schneider model propeller belongs Bauer models. The injection molds are are in ownership of Bauer models.

The VSP has been revised at Bauer models.
A newly-developed brushless motor, adapted to the performance data of the VSP, is used.
> No heat problems of the engine
Sealed bearings (stainless) are used.

If the VSP is correctly set and the ring limiter / ring limiter is used, the operating current can be reached with our brushless motor at max. 0.6A, i.e.. the driving time increases compared to brushed motors.

technical Data

Delivery:

- 1 Voith Schneider drive with brushless motor
- 1 mounting ring
- 6 stainless steel screws
- 2 ALU ball joints
- 2 threaded rods
- 2 clevises
- Tight cord
- Instructions in German / English

Made in Germany
If you have problems setting up your VSP in the model or other problems with the VSP's, you can contact Bauer models.
We have tested the new, inexpensive and powerful Servo 2845 in our test model. The servo is very robust, precise and also has a metal gearbox.

The VSP is an energy-efficient, robust low-speed rotor. In order to achieve as low a noise level as possible, a toothed belt is used for the transmission.
For simple installation in the model, the supplied mounting ring is glued in the fuselage.

The VSP can be easily screwed onto the fuselage. The bearing of the main shaft in two sealed ball bearings makes the VSP largely watertight. All other heavily stressed parts are made of metal or high-quality bearing plastic. Thus, a long service life is achieved with appropriate maintenance.
The wings can be replaced in case of damage.
2 Servos are required for the control.
The control lever is articulated by two enclosed M2 metal ball heads which are screwed on the control lever.

Controller

Link to VSP Simulator   für PC

Link to iVSP    für PC

Link to iVSP for mobiles :

• iVSP App für iPhone  im iTunes App-Store
• iVSP App für iPad  im iTunes App-Store
• iVSP App für Android  im Google Play Store