Figuren

1:10 - 1:14

These figures only on order by email

Names as in the other scales,

Order number : the last two figures 4.XXXX.10,   4.XXXX.8,  4.XXXX.4

Price 1:10 30.00€

Price 1:8 45.00€

Price 1:4 75.00€

1:16 - 1:20

All figures are 3d printed.
The support structures have been removed.
The figures are unpainted.

We pack the figures very carefully.

In very small scales, fingers, ropes, tools are printed very thinly and can break quickly.

These can be glued back on with superglue.

 Therefore ropes should be replaced with "real" ropes.

1:25 - 1:30

From August 2023, we will have all Haller 3D figures in our programme.

All figures are 3d printed.
The support structures have been removed.
The figures are unpainted.

We pack the figures very carefully.

In very small scales, fingers, ropes, tools are printed very thinly and can break quickly.

These can be glued back on with superglue.

 Therefore ropes should be replaced with "real" ropes.

1:32 - 1:45

From August 2023, we will have all Haller 3D figures in our programme.

All figures are 3d printed.
The support structures have been removed.
The figures are unpainted.

We pack the figures very carefully.

In very small scales, fingers, ropes, tools are printed very thinly and can break quickly.

These can be glued back on with superglue.

 Therefore ropes should be replaced with "real" ropes.

1:50 - 1:72

From August 2023, we will have all Haller 3D figures in our programme.

All figures are 3d printed.
The support structures have been removed.
The figures are unpainted.

We pack the figures very carefully.

In very small scales, fingers, ropes, tools are printed very thinly and can break quickly.

These can be glued back on with superglue.

 Therefore ropes should be replaced with "real" ropes.

1:75 - 1:100

From August 2023, we will have all Haller 3D figures in our programme.

All figures are 3d printed.
The support structures have been removed.
The figures are unpainted.

We pack the figures very carefully.

In very small scales, fingers, ropes, tools are printed very thinly and can break quickly.

These can be glued back on with superglue.

 Therefore ropes should be replaced with "real" ropes.