Voith Schneider Propeller VSP 65.BM, the original, with Bl- Motor and VSP Control

Made in Germany in the original injection molds.
To be distinguished from the logo on the kinematic base or engraving BAUER and the white mounting ring.
The original Voith Schneider Propeller (model propellers) can only be ordered from us or from the former manufacturer (not Graupner).
The rights to the design of this Voith Schneider model propeller belongs Bauer models. Bauer models has the ownership of the injection molds.

The VSP has been revised at Bauer models.
A newly-developed brushless motor, adapted to the performance data of the VSP, is used.
> No heat problems of the engine
Sealed bearings (stainless) are used.

If the VSP is correctly set and the ring limiter / ring limiter is used, the operating current can be reached with our brushless motor at max. 0.6A, i.e.. the driving time increases compared to brushed motors.

technical Data

Pole                                                                                                14
Timing                                                                                             22-25°

Delivery:
- 1 Voith Schneider drive with brushless motor
- 1 mounting ring
- speed control VSP-Control
- 6 stainless steel screws
- 2 ALU ball joints
- 2 threaded rods
- 2 clevises
- Tight cord
- Instructions in German / English

Made in Germany
If you have problems setting up your VSP in the model or other problems with the VSP's, you can contact Bauer models.
We have tested the new, inexpensive and powerful servo 2530MD in our test model. The servo is stronger and more accurate than the previously used Graupner servo and also has a titanium gear.
The VSP is an energy-efficient, robust low-speed rotor. In order to achieve as low a noise level as possible, a toothed belt is used for the transmission.
For simple installation in the model, the supplied mounting ring is glued in the fuselage. The VSP can be easily screwed onto the fuselage. The bearing of the main shaft in two sealed ball bearings makes the VSP largely watertight. All other heavily stressed parts are made of metal or high-quality bearing plastic. Thus, a long service life is achieved with appropriate maintenance.
The wings can be replaced in case of damage.
2 servos are required for the control.
The control lever is articulated by two enclosed M2 metal ball heads which are screwed on the control lever.

VSP Control
- Special software for quiet and slow start of the Voith Schneider Propeller without whistles.
- can run BL motors at extremely low speed
- adapted to the G-Power Brushless motors
- self-programming (voltage, cell number)
- one-time programming of the stick travels
- Tarnish protection
- Suitable for LiPo, NiMh, Lead Acid
- only forward, no brake
 

The VSP can be easily screwed onto the fuselage. The bearing of the main shaft in two sealed ball bearings makes the VSP largely watertight. All other heavily stressed parts are made of metal or high-quality bearing plastic. Thus, a long service life is achieved with appropriate maintenance.
The wings can be replaced in case of damage.
2 Servos are required for the control.
The control lever is articulated by two enclosed M2 metal ball heads which are screwed on the control lever.

If you need new sealing cord after repeated assembly -We have it in stock. The sealing cord can be reused many times.

Link to VSP Simulator   für PC

Link to iVSP    für PC

Link to iVSP for mobiles :

• iVSP App für iPhone  im iTunes App-Store
• iVSP App für iPad  im iTunes App-Store
• iVSP App für Android  im Google Play Store